YZ Bio-based Polymer Neck Brace

Product Description

The Bio-Based Duchess Gel Neck Brace is a medical device used to immobilize and protect the neck, often in cervical spine injuries, post-surgical immobilization, or in the treatment of certain diseases. It is made through the characteristics of low temperature moldability and memory function of bio-based Duchess Gum, which is softened by heating and molded into the shape of the patient's neck to provide stable support and limit neck movement.

Product Advantages

1. High plasticity: The material can be completely softened in hot water at about 70℃, and can be stretched and molded according to the shape of the patient's neck.

2. Memory function: If the molding is not satisfactory, it can be reheated and softened, and the material can recover its original size and shape, allowing repeated molding use.

3. Breathable: There are numerous meshes on the board, which increase the function of skin ventilation, heat dissipation and perspiration, helping to prevent skin redness and itching.

4. Light weight: light weight, high strength, not easy to break or fracture, safe and reliable to use.

Scope of application

1. Fixation of fracture and joint dislocation after reset surgery.

2. Fixation after orthopedic surgery for joint deformity, nerve paralysis and tendon injury.

3. Fixation of acute and chronic inflammation of joints and acute inflammation of soft tissues of limbs.

4. Making rehabilitation support and orthopedic support.

5. Fixation of radiotherapy positioning.

Usage

1. Put the low-temperature thermoplastic sheet of Duchess rubber into the hot water of about 70℃ until it is completely softened, and then take it out.

2. Place the softened material in the fixed position, stretch it evenly and fix the side strips on the fixation frame, and then shape the human body locally, the operation time is 3-5 minutes.

3. After the molding is completed, leave it for 5-10 minutes to completely harden and set the shape. If the indoor temperature is too high, the cooler can be used to forcibly cool the hardening and shaping.

Precautions

1. The water temperature should be kept at 70-100℃, and the material must be completely transparent before taking out the molding.

2. Do not use too much force or fix it too tightly when molding, so as not to cause discomfort due to the trace contraction of the material itself during the hardening process.

3. The second molding should be cleaned of surface stains, and then heated to soften, repeated molding should not be too much to avoid affecting the effect.

4. In addition, please make sure that you have received guidance and training from relevant professionals before using the Bio-Based Dulcolax Neck Brace.

5. The steps for proper wearing of the neck brace include removing the brace, placing the back of the brace behind the injured person's back near the neck, slowly lifting up the sides of the brace to secure it to the injured person's jaw, ensuring that the brace fits securely around the injured person's neck, but not too tightly, and checking the brace for any looseness or discomfort and making any necessary adjustments.